

When an air conditioner leaks water inside the house, the cause is almost always a problem with the condensate system: the drain line, the drain pan or the evaporator coil. Turn the system off at the thermostat, soak up the water, and have a technician find out why it happened. Running the unit while it leaks is what turns a small repair into a ruined ceiling or subfloor. If you are in Colorado Springs, Fountain, Monument or the surrounding area, our NATE-certified technicians offer same-day service when it can’t wait, with flat-rate pricing quoted before the work begins.
This guide explains where the water comes from, how to tell the likely causes apart, what is safe for a homeowner to do right away, and which signs mean the leak needs professional attention.
TL;DR
- A leaking AC is usually a clogged condensate drain line, a frozen evaporator coil that is thawing, or a cracked or rusted drain pan.
- Set the thermostat to Off, mop up the standing water and do not run the system again until the cause is found.
- A dirty air filter is the one fix you can safely do yourself. Do not open the air handler cabinet or touch electrical parts.
- A fan that will not spin, a coil that keeps freezing, or a leak that returns after being cleared all call for a technician.
- Yearly maintenance that includes the drain line is the most reliable way to prevent the leak.
Table of Contents
- Why an air conditioner makes water in the first place
- The most common causes of an AC leaking water
- Can you keep running an AC that is leaking water?
- What to do in the first ten minutes
- Water leaking from the air handler or through a ceiling
- Why the drain clogs, and what the warning signs look like
- AC fan not spinning: is it related to the leak?
- When an AC leak is an emergency
- What a technician checks, and what it can cost
- How to prevent AC condensate leaks
- Let us take care of the leak
- Our perspective on AC leaks
- FAQ
- Sources
Why an air conditioner makes water in the first place
Your air conditioner does not only cool the air. It also removes humidity. As warm indoor air passes over the cold evaporator coil, moisture condenses on the coil the same way it does on a cold glass in summer. That water drips into a pan under the coil and runs out through a drain line, usually a PVC pipe that exits outside the house or ties into a plumbing drain.
That is why an AC that leaks is almost always a condensation-handling problem: the system is producing moisture as designed, and something in the path has failed, so the water backs up into your home instead of leaving it. Knowing that makes troubleshooting simpler. You are looking for the point where the water stopped flowing: the coil, the pan or the line.
Some water outside is normal. A little dripping from the drain line end on a humid day means the system is working. Water pooling indoors, dripping from vents, or showing up as a stain on a wall or ceiling is not normal.
The most common causes of an AC leaking water
The ranking pages agree on a short list. The order below follows how often each cause turns up, and what each one looks like when you find it.
A clogged condensate drain line
This is the most frequent cause. The drain line carries damp, dark water, which is a good place for mold, mildew, dust and even spider webs to build up. Clogs usually come from mold growth, dust, rust or an installation problem such as an incorrect line slope. When the line stops draining, the pan fills and the water spills over, often near the indoor air handler.
Signs of a clogged line include water near the indoor unit, water stains on walls, a musty smell near the vents, higher indoor humidity, a full pan, and a system that shuts off or won’t start. Some systems include a float switch that cuts power to the AC when the water level gets too high. If your unit suddenly stops cooling on a hot day, that switch may be doing its job.
A frozen evaporator coil
When ice builds on the evaporator coil, the AC may seem fine for a while. Then the ice melts, and the pan and drain line cannot handle that much water at once, so it overflows. Ice usually forms because of restricted airflow, such as a dirty filter or blocked vents, or because of low refrigerant.
If you see frost on the copper lines or the indoor coil, the unit is telling you something is wrong with airflow or refrigerant. Running it longer does not fix that. It can also seize the blower motor, which we cover below.
A cracked, rusted or overflowing drain pan
The drain pan sits under the coil and catches the condensation. Older pans, especially metal ones, can rust through, and plastic pans can crack over time. A damaged pan leaks even when the drain line is perfectly clear, which is why a leak that comes back after the line has been cleared often points here.
The pan is inside the air handler or above a ceiling in many homes, so a pan leak can run for days before anyone sees it. That is the reason to treat any new stain on a ceiling below an attic air handler seriously.
A failed condensate pump or float switch
Homes where the air handler sits below the level of the drain, such as a basement or a utility closet, often use a small pump to push condensate up and out. If the pump fails, water backs up in the pan. A float switch that keeps tripping the system off is a related sign. Both are inexpensive parts, but diagnosing which one failed, and why, is a technician’s job.
Low refrigerant or a damaged outdoor unit
Low refrigerant is a common reason a coil freezes in the first place, and a damaged condenser can leave the system out of balance in ways that lead to leaks. Refrigerant does not get used up like fuel. If it is low, there is a leak somewhere, and it has to be found and repaired, not simply topped off. Our guide on measuring before you replace for refrigerant leaks explains what a proper check looks like.
Can you keep running an AC that is leaking water?
No. Trane’s air handler guidance is to shut the system off at the thermostat or circuit breaker when you see water dripping or a puddle growing near the air handler, because running it could cause damage. We agree, for three practical reasons.
First, water keeps coming. If the drain is blocked, every hour of cooling adds to the puddle. Second, water near the air handler is also near wiring, a control board and often a furnace. Third, if the cause is a frozen coil, running the unit can overwork the blower and compressor.
Set the thermostat to Off, not just to a warmer temperature. A warmer setting may still let the system cycle on later in the day, and the leak starts again while no one is home.
What to do in the first ten minutes
These steps are safe for most homeowners and limit the damage while you wait for service.
Turn the system off
Switch the thermostat to Off. If water is close to electrical components or the air handler, and you can reach the breaker panel without stepping through water, switch off the breaker for the air conditioner too. If the floor around the panel is wet, stay out and call us or an electrician.
Soak up the water
Standing water can stain drywall and damage flooring quickly. Mop or towel up the puddle, move rugs and furniture, and use a wet/dry shop vacuum for larger amounts. If the unit is in an attic, do not climb up in summer heat just to look. Attic temperatures can be hazardous, and a technician can reach the unit safely with the right tools.
Check the air filter
A badly clogged filter is a common cause of airflow problems that lead to a frozen coil. If yours is visibly dirty, replace it. This is the one repair on the list that every homeowner can do, and it takes two minutes. Do not restart the system just because the filter is new, though. If the coil iced up, it needs time to thaw completely, and the underlying reason it froze may not have been the filter.
Look, but do not open anything
You can look at the drain line’s outdoor end to see whether it is dripping, and at the area around the indoor unit for a visible puddle or stain. Leave the air handler cabinet closed. Inside it are electrical parts, a blower motor and a coil with sharp fins, and capacitors can hold a charge even with the power off.
If you want to see what clearing a minor blockage involves, we explain it in our article on how to fix a condensate drain clog safely. If the water keeps returning, the line, the pan or the slope of the pipe needs to be looked at by a technician rather than cleared again and again.
Water leaking from the air handler or through a ceiling
Where the water shows up tells you something about the cause. Water pooling at the base of the indoor unit usually points to a clogged drain line or a thawing coil. Water coming from the pan itself, or through a ceiling below an attic unit, suggests the pan has cracked or the line has backed up well above the floor.
Water dripping from supply vents is a different pattern. It can be a result of heavy condensation in ductwork or an overflowing pan sending water into the system. A ceiling stain that grows, sags or feels soft needs prompt attention, since wet drywall can fail. Turn the system off, keep people and furniture away from the sagging area and call for service the same day.
A leaking air handler can also be a furnace problem in the winter months, when a high-efficiency furnace produces its own condensate. If you see water around a heating unit, our article on a furnace leaking water walks through the safety steps.
Why the drain clogs, and what the warning signs look like
A condensate line works quietly for months, and then one day it quits. The slow buildup is the point. Dust that passes the filter, mold in a damp pipe, and a slight sag or poor slope in the line all contribute. Today’s Homeowner notes that these clogs often come with warning signs before the overflow: a musty smell near the vents, more humidity indoors, and a pan that stays full.
The U.S. EPA’s ENERGY STAR guide adds a point that is easy to miss. A plugged condensate drain can cause water damage in the house, affect indoor humidity and breed bacteria. A drain problem is therefore a comfort and indoor air issue as well as a leak issue, and the EPA recommends having the condensate drain checked during maintenance.
If a clog comes back after being cleared, the cause is usually not simply dirt. Poor slope, a break in the line, a damaged pan or an airflow problem is more likely. That is where a technician’s diagnosis saves money, since repeated cleaning never reaches the real cause.
AC fan not spinning: is it related to the leak?
People searching for a leaking AC often find that the fan has stopped too, and the two symptoms can be connected. There are two fans to think about. The indoor blower pushes air across the coil and through your ducts. The outdoor condenser fan moves air across the outdoor coil to release heat.
Carrier’s fan guide lists four leading causes of a fan that won’t spin: a tripped circuit breaker, a bad run capacitor, a burnt-out motor and a clogged air filter. It also notes that a frozen evaporator coil can physically block the blower fan or seize the motor. So a frozen coil can lead to both a leak, when it thaws, and a stopped fan.
What you can safely do is check the thermostat, look at the breaker and reset it once if it has tripped. Do not keep forcing a breaker that trips again, because that tells you there is an electrical fault. If the outdoor fan is not spinning but the unit hums, shut the system off at the thermostat. Capacitor and motor work is for a technician, since capacitors can hold a dangerous charge even with the power off, and pushing a fan blade by hand to start it can cause injury or damage.
A condenser fan that does not run also causes the unit to overheat and shut down on its own, which can show up on a hot Colorado afternoon as a system that blows warm air. Our article on why your AC isn’t blowing cold air covers that pattern.

When an AC leak is an emergency
Most leaks are not dangerous, but some deserve a same-day call. Treat the leak as urgent when:
- water is coming through a ceiling, or a ceiling stain is growing or sagging
- the leak is near electrical components, the breaker panel or a furnace
- the unit will not restart, or a float switch keeps shutting the system down
- you see ice on the coil or refrigerant lines and the leak is large
- the water has a musty smell, or you see mold or visible water damage
- the leak returns after the line was cleared
In the first four cases, turn the system off and call. For more on what counts as urgent across your whole system, see our guide to warning signs your HVAC needs emergency repair now and our notes on what to do when comfort can’t wait. If a water leak has reached electrical wiring or you smell burning, stay away from the area and call an electrician or emergency services as appropriate.
What a technician checks, and what it can cost
A proper service call for a leaking AC follows the water. The technician confirms where it comes from, checks whether the drain line is clear and sloped correctly, inspects the pan for rust or cracks, looks at the coil for ice, checks the filter and airflow, and tests refrigerant levels and the blower. That is more than a one-minute fix, because the goal is not to make the water stop today, it is to make sure it does not return next week.
We publish flat-rate pricing so you know the cost before work begins, with no hidden fees. Repair prices depend on what is found, and we do not publish a fixed price for AC repair. What we can say is that a leak caught early is usually a drain line, a filter or a minor part, and a leak left running is where the cost grows into drywall, flooring and mold.
It is also worth asking a technician about the age of the system. If a unit is old, leaking repeatedly and running poorly, replacement may be the sensible conversation. Our article on the real cost of running an old AC through a Colorado summer lays out how to weigh it.

How to prevent AC condensate leaks
Prevention is mostly routine. Change the air filter on the schedule recommended for your system and household, since a dirty filter is a common route to a frozen coil. Keep the area around the indoor unit clear so you can spot a drip early. Have the drain line inspected and cleaned at least once a year, or more often in humid environments, as Carrier’s HVAC experts recommend.
The U.S. Department of Energy’s cooling guide also recommends checking the unit drain to make sure it isn’t clogged. And Trane’s service guide describes annual AC maintenance as including inspection and cleaning of the condensate drain line and pan, cleaning the blower motor and fan, checking refrigerant and changing the filter. That is the same list that prevents most of the problems in this article.
A float switch is a useful backstop. It shuts the system off before the pan overflows, so a clog stops the AC instead of flooding the room. If your system does not have one, ask about adding it at your next visit.
For property managers, the same logic applies at scale: one missed drain on a rooftop or closet unit can mean a tenant complaint and a repair on the ceiling below. A maintenance schedule that includes every unit’s drain is cheaper than responding to leaks one at a time.
Let us take care of the leak
If your AC is leaking now, the fastest route is a visit from a technician who finds the cause and repairs it correctly the first time. Strong Heating And Cooling is a veteran-owned HVAC company based in Colorado Springs, with over 40 years of combined experience and NATE-certified technicians. We offer same-day service when it is needed, and our work is backed by a workmanship guarantee. Start with our AC repair page, or look at our air conditioner services in Colorado Springs.

If the leak has you thinking about replacement, our published starting prices are $5,500 for a 14 SEER2 single-stage air conditioner and $6,500 for a 16+ SEER2 single-stage unit. A 15 SEER2 single-stage heat pump starts at $6,500, a 17 SEER2 three-stage heat pump at $8,500 and an 18 SEER2 variable heat pump at $10,000. You can see the details on our AC pricing page. Our HVAC maintenance plans are also an option for keeping drains, filters and coils checked every year.
Our perspective on AC leaks
We treat a leaking air conditioner as a symptom, not the problem. Water on the floor tells you the condensate system stopped working, and the useful question is why. A drain clog that comes back, a coil that keeps freezing and a pan that has rusted all look the same on the floor, and they have three different fixes.
That is why we focus on doing the job correctly the first time. Our technicians are NATE-certified, and we bring over 40 years of combined experience to a service call. We quote flat-rate pricing up front, so the homeowner knows the number before the work starts and does not have to wonder about hidden fees.
Our advice for most Colorado Springs homeowners is simple. Turn the system off when you see water, protect your floors, and call us the same day if the leak is near a ceiling or electrical parts. Then put the drain line, the filter and the coil on a yearly maintenance visit, so the leak does not become a second one. A tune-up costs a lot less than a ceiling.
We stand behind our workmanship, and we would rather see a small drain problem early than a large water problem late.
Owner
FAQ
Is a leaking AC unit an emergency?
It is an emergency when water is coming through a ceiling, reaching electrical components, or spreading quickly. Turn the system off at the thermostat and call for service the same day. A slow drip at the base of the indoor unit is less urgent, but the system should still stay off until the cause is found.
Why is my AC leaking water but still blowing cold air?
The cooling can work while the drain is blocked, so the unit keeps making water that has nowhere to go. A clogged line or a cracked pan is the usual reason. The system may seem fine until a float switch trips or the pan overflows, so do not wait for it to stop on its own.
Can a dirty air filter make my AC leak?
Yes, indirectly. A badly clogged filter restricts airflow, which can make the evaporator coil freeze. When the ice melts, the extra water can overflow the pan. Replacing a dirty filter is a safe homeowner step, but if the coil froze, let a technician find out whether airflow or refrigerant was the cause.
Why is my AC fan not spinning?
Common causes are a tripped breaker, a bad capacitor, a failed motor or a clogged filter, and a frozen coil can block the blower. You can check the thermostat and reset a tripped breaker once. Capacitor and motor work should be left to a technician, because capacitors can hold a charge when the power is off.
How often should the AC drain line be cleaned?
Have it inspected and cleaned at least once a year as part of AC maintenance, and more often in humid conditions. If you have had a clog before, ask for the drain to be checked at every visit. Our maintenance plans are one way to keep that on a schedule.
Sources
- Why Is My AC Leaking Water? | Carrier
- AC Drain Line Clogged? Here’s How To Fix It and Prevent It | Today’s Homeowner
- Air Handler Dripping Water: Causes and Solutions | Trane
- AC Fan Not Spinning? 8 Causes & How to Fix Them | Carrier
- Outside AC Fan Not Spinning? Utah Fix Guide | Salmon HVAC
- A Guide to Energy-Efficient Cooling and Heating | U.S. EPA ENERGY STAR
- Tips for Lowering Your Cooling Costs | U.S. Department of Energy
- Home AC Service & Repair Guide | Trane
Recommended
Need expert HVAC help?
Colorado Springs' veteran-owned heating & cooling team — Mon–Sat, 8 AM–7 PM. Same-day service when available.
